The Ecocleaner 740 has a cylindrical cleaning chamber with a diameter of 740 mm and a height of 200 mm.
-
Interior
ecoCleaner 740
Ecocleaner 740
The Ecocleaner is a cleaning device for machine parts soiled with ink in pad printing, rotary pad printing and offset printing. No conventional thinner is used. The water-based cleaning agent is environmentally friendly and not a hazardous substance according to GHS. Therefore, this cleaning device does not require a special cleaning room. The cleaning agent dissolves the ink and absorbs it. The dirty cleaning agent is pressed through a filter powder, which in turn takes the paint out of the liquid. This means that the cleaning fluid can be used again and again for a very long time and thus the maintenance costs are much lower than with usual cleaning devices.
-
Inserts for parts The holders for pots and cliché are customised to ensure optimum cleaning with maximum safety for the sensitive parts.
-
Nozzles The cleaning system has 3 jet pipes with nozzles. One blast pipe blasts from below through the parts pick-up grid; another blasts from above and one from the side onto the parts.
-
Operation The Ecocleaner is controlled via the clearly arranged control panel. The function display consists of LEDs which are language-independent and visible from a distance.
-
Colour The Ecocleaner is suitable for 1-component, 2-component and UV inks. Even heavily dried 2-component inks can be cleaned with several cleaning cycles.
-
Service To facilitate servicing, the new Ecocleaner NTD has a larger tank, an additional recycling stage and cleaning nozzles to clean itself.
-
Characteristics W x D x H : 1164 x 908 x 1097 mm
Capacity : 70 litresPower supply : 230V 50/60Hz
Air supply: 5 bar
Cleaning time: 5/10/15 min
Weight: (without Cleanax): 239 kg
© All Rights Reserved osmeco